1. <acronym id="ce5dl"><label id="ce5dl"></label></acronym>

    2. <table id="ce5dl"></table>
      APV換向閥 衛生級APV換向截止閥 APV Sanitary Reversing Valve

      APV換向閥 衛生級APV換向截止閥 APV Sanitary Reversing Valve

      APV換向閥  衛生級APV換向截止閥  APV Sanitary Reversing Valve





      尺寸從DN25/1“到DN100/4"   標準為常閉型閥門(NC)

      通過簡單的改變氣動執行器的活塞,閥門就可以轉變成常開型(NO) 根據3A 標準衛生設計  360度可調節外部結構  開啟的窗口用于觀看檢查軸密封情況通過松開卡箍,就可以簡單的拆卸內部部件    焊接式連接口(毫米或英寸)

      材質 和物料接觸部分: AISI 316L、AISI 304           其他部分為不銹鋼: AISI 304

      密封圈:EPDM 根據FDA 177.2600   內表面處理: Ra 0.8μm       外表面處理: 噴砂、拋光

      選項  墊圈:FPM(氟橡膠),符合FDA 177.2600

      連接:DIN,卡箍,SMS,RJT,FIL- IDF...

      雙作用氣動執行器       “雙阻止"執行器   外置傳感器    蒸汽消毒(如果軸需要殺菌)

      C-TOP控制單元         表面處理: Ra 0.5μm              手動操作


      規格:DN25-DN100         DN1"-DN4"

      工作溫度:-10℃到+ 120℃(EPDM)


      +140 (SIP 30min)


      最大工作壓力: 10 bar         145 PSI

      壓縮空氣壓力: 6-8 bar       87-116 PSI

      氣源連接: G1/8" (BSP)  

      APV Sanitary Reversing Valve                                  

      Applications The divert seat, valve is a kind of hygienicsingle-seat valve pneumatically ,which is applied to a wide range ofapplication in the food-processing industry, beverage production.pharmaceutical and fine chemicals industries.

      Operating principle Seatvalves are operated automatically by a single-acting or a

      double-actingpneumatic actuator. By supplying compressed air,the shaft is moved to place the valve in the "open" or”closed”position.

      The180°rotation of the pneumatic cylinder of single-actingactuators allows to have a normally open or normally closed valve.

      Design and features  Compact androbust design. 3A certified valve.

      Availablesizes: from DN 25/1" to DN 100/4".

      Normally closed valve (NC) in the standard version.

      Thevalve can be changed to normally open (NO) by simply reversing the position ofthe pneumatic actuator.     Hygienicdesign according to 3A standards.    360°adjustable body.           Openlantern allows visual inspection of shaft sealing.    Easy assembly/disassembly of internal parts byloosening a clamp fastener.

      Standardweld connections (mm or inches).

      Materials Parts in contact With the product:AlSl 316L、AlSl 304

      Otherparts in sainless steel: AlSl 304        Gasket:EPDM according to FDA 177.2600

      lnternalsurface finish: Ra 0.8μm            External surface finish: bright polish

      Technical specifications Availablesizes:DN25-DN100 DN1“-DN4”

      Workingtemperature:-10℃to+120℃(EPDM) 14°F to 248°F

      +140℃(SlP,max.30 min) 284°F         Max.working pressure: 10bar     145 PSl

      Compressedair pressure:6-8bar       87-116PSl              Air connecitons :G1/8” (BSP)

      OptionsGaskets: FPM (Viton (R)) in compliance with FDA 177.2600

      Connections:DIN, Clamp, SMS, RJT, FlL-lDF, etc.           Double-acting pneumatic actuator.

      "Twin-Stop"actuator.    External position sensors.     Steam barrier (if shaft sterilisation isrequired).       Jacketed body.       C-TOP control unit.         Surface finish: Ra0.5μm   Manual actuation.     Materialand roughness certificates.